Custom Made S Hi-Rail Turnouts

We are planning to offer our Hi-Rail turnouts in #4, #6 and #8 frog angles.

These are pre-orders! Delivery Estimate in 6-8 weeks after tooling is ordered.

All are professionally hand crafted and covered by a 100% satisfaction guarantee.

Skip to product information
1 of 1

#4 Right Hand S Hi-Rail Turnout - Hi-Rail wheels

#4 Right Hand S Hi-Rail Turnout

Regular price $55.95 USD
Regular price $61.95 USD Sale price $55.95 USD
Sale Sold out
Rail Code
Tie Option

Currently Unavailable. Check Back Later.


Please contact us if you would like to order any out of stock switch and we can work with you to fill your order.

Default Turnout Length 11.4" (290 mm) This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length 8.5" (216 mm) This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle 14.04 (Decimal)
1:4 (Ratio)
Decimal = Frog angle in decimal degrees
D/M/S = Deg/Min/Sec
Ratio = Frog angle expressed as a ratio
Diverging Route Radius 19" (483 mm) The minimum radius in a straight turnout.
Tie Spacing (Prototype) 20" (508 mm) Tie spacing center of tie to center of tie.
Tie Size (Model) L - " ( mm)
W - " ( mm)
H - 0.0625" (2 mm)
The actual size of the tie.
Tie Size (Prototype) L - 8.5' (2.6 m)
W - 9"(229 mm)
H - 7" (178 mm)
The original tie size that the model was based on.
Track Gauge 0.88" (22 mm) The distance between the stock rails.
Substitution Radius 28" (711 mm) The approximate radius that the diverging route of a turnout can be fit into. This calculation was made using the shortest possible turnout length measured from the edges of the PC board ties, not the wood ties.

Turnout Details

Our turnouts are professionally assembled on custom jigs using PC Board Ties to hold the gauge at key locations. You can order them with or without laser cut crossties added to complete the switch. Most turnouts are currently available in Code 125, 138 and 148.

Tie Options

Our turnouts are available without wood ties for those that wish to supply their own ties. For a ready to run turnout, you can select wood laser cut ties in either raw wood or stained a dark walnut color. Our wood tie options have holes drilled in key locations so you can use Micro Engineering spikes to hold them in place.

DCC Compatibility

All of our turnouts are 100% DCC Compatible out of the box. No modifications are needed for these turnouts to work with AC, DC, or DCC!

100% Guarantee

We offer a 100% satisfaction guarantee. If you are not fully satisfied with your order, you may return it for a replacement or full refund.

View full details